Skip to main content

PHASS

Making Music Sound Real
Home  Amplifier  Speakers  Topics (トピックス)  Contact  Accessory and cable  Our clients  日本語Home   
RE balance > RE standard > Convertor & Driver > AP and TP amplifiers >  
RE standard amplifiers                                                                             RE amplifier technology
 
 
 
 
The real high end sound
 
RE amplifiers (RE 50 ~ RE 2) are true amplifiers which can drive speaker with thinking as it is synonymous with a changeable impedance, not a fixed resistance. Only RE can reproduce the original music signal with strict fidelity.
 
 
 
RE 2.2
 
RE 2.2  / 2ch amplifier

 

RE 2.2 is one of our top grade model in the RE amplifiers. It has been constructed by our originally developed transformers and audio grade electric parts without any compromises.  It achieves a great ability that can fully control speakers and it realizes a exceptional reproduction of nature sound music. 

 

Output power: 2x40W  / Input sensitivity : 0.25V  / Input impedance : 10Kohm / Load impedance : 4-16 ohm /  Consumption current : Idle time (no signal) - 3A, Remote off time : 2mA  / Size (mm) :320(W)x92(H)x504(D)    

 

 

 

 

RE 50Hi 

                                                                        

RE 50Hi  / Hi-input 2ch amplifier

 

RE50Hi is an amplifier has a high input stage without a RCA signal input stage. It can transmit the music signal which inputted from another amplifier to the connected speakers simply as the constant current driving amplifier. In conjunction with the original head unit or amplifier with the speaker output power it can change the original sound totally to articulate organic sound easily.

 

Output power :2x50W  / Input sensitivity : 5V / Load impedance : 4-16 ohm /  Consumption current : Idle time (no signal) - 3A, Remote off time : 2mA  / Size mm) :280(W)x74(H)x320(D)

 
 
 
 
RE 50

                  

 

RE 50 / 2 ch amplifier 

 

RE 50 series of amplifiers are more compact, and less expensive than the RE 2.2.  But, they still represent the essence of our RE line of amplifiers, with constant current driving ability and dynamic, articulate and natural music reproduction.

 

Output power : 2x50W  / Input sensitivity : 0.25V / input impedance : 20 K ohm / Load impedance : 4-16 ohm /  Consumption current : Idle time (no signal) - 3A, Remote off time : 2mA  / Size (mm) :280(W)x74(H)x320(D)

 
 
 
 
 
RE 4.25   
         
 
RE 4.25 / 4 ch amplifier 
 
RE 4.25 is a Single End Push Pull (S.E.P.P.) amplifier. Its NON-NFB circuit produces appropriate output power suitable for delivering electric current into speakers with quite low noise, allowing the amplifier to easily control speakers and produce vivid sound. Our sound design concept places RE 4.25 on the real highest class of SEPP amplifiers as well.
 
Max output power:25Wx4 (RMS, 1KHz, 8ohm), 100Wx2 (RMS, Bridge Connection) / Music Power: 50Wx4  / Input sensitivity(10Kohm): RCA 1.6V / Consumption current:Idle time (no signal) 1A, Remote off time: 2mA / Size(mm): 250(W)x56(H)x326(D)