Skip to main content

PHASS

Making Music Sound Real
Home  Amplifier  Speakers   Our clients  Topics (トピックス)  Contact  Accessory and cable  日本語Home   
RE balance > RE standard > Convertor & Driver > AP and TP amplifiers >  
AP & TP amplifiers
 
 
 
 
 
 
 
 
 
 
AP 4.50 
 
 
AP 4.50  / 4 channel power amplifier 
 
New AP 4.50 is the standard amplifier which has a good reproduction ability as the Single End Push Pull circuit
layout one which are used in ordinary entry level amplifiers in the world. And it realized the high power handling
and standard sound beyond the imagining. It is the real cost efficiency small amplifier.
 
  
 
Power output : 4 x 50W(0.1%THD) / Music power : 4 x 75W (4 ohm), 4 x 120 W (2 ohm) /  Power supply: 11 - 15VDC / Input sensitivity : 0.2-4V / Input impedance : 22 K ohm  / Frequency response / 2 Hz- 36KHz (-3 dB) / S/N ratio : 90 dB / Distortion THD: < 0.05% / Idling current :0.4A / Remote Voltage : 10-17V /  / Fuse : 25 A x 2 / Load impedance: 2- 4 ohms / Dimension : WxLxH mm 140 x 273 x 53 
 
 
 
 
 
 
AP 2.25 (Discontinued)
 
 
 
 
AP 2.25  / 2 channel power amplifier
 
It is our small power amplifier which has the high reproduction ability as an entry model.  AP 2.25 can easily perform a definitive sound far beyond its small body and wattage.   
 
Power output : 35Wx 2(13.8V/4ohm) / Rated power: 25Wx2(@12.5V 0.1%THD) / Power supply: 11 - 14VDC / Input sensitivity : 0.2-4V / Input impedance : 10K ohm  / Frequency response / 2-80KHz / S/N ratio : >100dB / Distortion THD: 0.05% / Idling current : 0.4A / Remote Voltage : 10-17V /  / Fuse : 10A x 1 / Load impedance: 2-8 ohms / Dimension : WxLxH mm 225 x 135 x 56
 
 
 
 
 
 
AP 80.2 
 
AP 80.2  / 2 channel power amplifier
 
AP80.2 is the entry model in our single end push pull amplifier line. Its high capability improved by the exceptional sound tuning can keep definitive sounds stable.
   

 

Power output : 80W x 2(13.8V/4ohm) / Input sensitivity : 0.25-4V / Input impedance : 20K ohm  / Frequency response / 2-80KHz / S/N ratio : >90dB / Stereo separation : 75dB /Idling current : 1.3A / Remote Voltage : 10-17V / Crossover frequency (Hi & Low-pass) : 50-200Hz / Fuse : 15A x 2 / Dimension : WxLxH mm 280 x 200 x 57

 
 
 
 
 
 
TP 2.150 
 
TP 2.150  / 2 channel power amplifier 

 

It is a hybrid power amplifier which used vacuum tubes in the pre amplifier stage. Its high reproduction ability refined by our skilled technique can easily drive the connected speakers.

 

Power output : 150W x 2(14.4V/4ohm) / Input sensitivity : 0.25-4V / Input impedance : 20K ohm  / Frequency response / 2-80KHz / S/N ratio : >95dB / Stereo separation : 75dB /Idling current : 1.3A / Remote Voltage : 10-17V / Crossover frequency (Hi-pass) : 50-200Hz / Fuse : 15A x 4 / Dimension : WxLxH mm 452 x 200 x 59